中文版 | English
> Company News
> Industry Information
> Events Notices
Analysis on Construction Code of Anti - static PVC Plate for Plastic Products
 
Specification for construction of pvc board for plastic products
Materials, equipment and tools
1. Construction materials should meet the following requirements:
(1), the board: physical performance and appearance size should be consistent with "anti-static plywood general specification" SJ / T11236 requirements, and has a permanent anti-static performance. Its volume and surface resistance: conductive electrostatic type of the resistance of the panel should be less than 1.0 × 106 Ω.
(2), conductive adhesive: should be non-water-soluble glue, the resistance value should be less than the resistance value of the panel, bond strength should be greater than 3 × 106 N / m2
(3), plastic electrode: should be uniform color, the same diameter, flexible and good material.
(4), conductive wire with copper foil: thickness should not be less than 0.05mm, wide should be 20mm.
 
2. Plywood should be stored in a ventilated and dry warehouse, away from acids, alkalis and other corrosive substances. Handling should be light loading and unloading, is strictly prohibited violent impact. It is forbidden to be sun and rain.
3. Commonly used construction equipment (including tools) should include slot machines, plastic welding torch, rubber hammer, knife, ruler
Article link: in plastic online http://info.21cp.com/Zhipin/Zixun/201710/1345208.htm
Date: 2017/10/30 Read:1881times
 
Copyright© CaYu Investment Management (Xiamen) Co.Ltd Rights Reserved   Add:dongpu road no. 22,Amoy area , xiamen ,China